We are offering Dry Mix Plaster/Mortar with following grade, which is confirming Indian & other relevant standard.

1.      SUPER SPECIAL GRADE

2.      SPECAIL GRADE

3.      REGULAR

PLASTER COLOUR SHADES AVAILABLE:-

1.    GREY  2. GREEN  3. RED  4.  BROWN  5. BLACK  6. YELLOW 

COMPARISION CHART :  

  BENEFITS :

·         Premix and ready to use

·         Eliminates site mixing procedures

·         No water curing required at sites

·         Superior flow ability and water resistant properties.

·         Less chances of efflorescence due to processed raw materials.

·         Less quantity of mortar required compared to conventional mortar.

·         It is highly adhesive, improves overall masonry strength and load

          bearing capacity.

TECHNICAL SPECIFICATIONS :

Temperature: 23 C - 27 C and Humidity: 45-55%

APPLICATIONS :

              Blockfix is an ideal product for use in placement of  :-

·         AAC blocks

·         CLC blocks

·         Flyash bricks and blocks

·         Hollow blocks

STANDARD TILE FIX

 Stallion standard tile fix show improved adhesion. Generally used for the tile porosity of greater than 3 percent and sound mineral substrate. Standard tile adhesive will be suitable for most ceramic (that is non-vitrified) tiles and the majority of porous stones and backgrounds.-

·         Small to medium sized earthenware tiles

·         Stoneware tiles

·         Ceramic tiles 

·         Quarry tiles

·         Non-vitrified Tiles/Vitrified Tiles

·         Granite etc.

PREMIUM TILE FIX

 Stallion premium tile fix is a polymer modified high quality mineral adhesive with good adhesion to all substrates and higher deformability. It is generally used for the tile porosity of less or equal to 3 percent. Premium adhesive will be suitable for vitrified/fully vitrified tiles, dense and large dimension tiles (slabs), and where background and location is especially demanding. Following when substrate is subject to certain degree of shrinkage and deformation movement:-

·         Porcelain tiles (water absorption < 0.1%)

·         Natural stone tiles in all format.

·         Vitrified/fully vitrified

·         New tiles on existing mosaic or vitrified/ceramic

·         Marble tiles etc.

ADVANTAGES

STORAGE   :   Store in dry & ventilated place conditions between 40°F and 80°F in original                               unopened. Shelf life under these conditions is 12 months. Keep away from direct                         sunlight.            

COVERAGE :   Approx, 90-100 sq ft is covered by a bag of 25 kg for 3 mm thickness. (Depends                          upon the type of substrate & thickness)

POT LIFE    :   1 Hour.

INSTRUCTION FOR USE

SUBSTRATE PREPARATION:

•  Remove loose particles, dirt, grease and traces of foreign material from the surface, if  necessary by using wire brush, water jetting, mopping etc.
•  Wet the surface if surface is dry.
•  Tiles shall be clean, dust free and dry while using.

MIXING METHOD

•   Pour the contents of tile fix mortar in tray/container and add water (i.e.5-6 liters for 25 kg bag).
•  Mix thoroughly until a lump free homogeneous paste is obtained; allow stand for 5  minutes, re-stir and then apply with a    thickness of 3 mm to the substrate. (Machine mix  is preferable). The resultant paste remains workable for about 1 hour.

 TILING

• Spread the mixed adhesive to a thickness of approx. 3-5 mm & comb with a notched trowel.
• Fix the tile on prepared layer; care should be taken about proper adhesion. Tile should be  fixed before the surface is dry. Place tile within 10 min of application of tile fix and press  firmly with twisting moment.
• The mixed mortar should be used maximum within 1 hour.
• Use damp cloth to remove excess paste from tile surface.
• Do not disturb tiles setting for first 24 hours.

CURING TIME

• Substrate is set after approx. 24 hours till then do not disturb.

 TECHNICAL SPECIFICATION

 PRECAUTIONS

•    Do not use directly on metals or plastic substrates.
•    Grouting should not be done for at least 24 hours
•    Do not use directly on hydrated limes/wood/paint surfaces.

 SAFETY DIRECTIONS

•    Care should be taken regarding dust inhalation and avoid contact with eyes    or face.
•    Wear hand gloves to avoid direct contact to skin during application.
•    Keep out of reach of children

Uses:

Eco-Plast is used on exterior and interior walls plastering, it can be also use in masonry work for erection. The same product is used for the first coat (scratch) and second coat (brown).

Suggested mix proportion for plastering work:

Features:

          ·             Appearance : Free flowing powder

          ·             Compressive Strength : 7-12 MPa @ 28 days

          ·             Tensile Adhesive Strength : > 0.80 N/mm2

                              ·             Pot Life : > 1 hour

Specifications:

Specifications:

Packaging : 25 kg PP bags

Whiteness : 98%

Thickness on wall : 8mm to 13mm

Setting time : 15 minute to 20 minute after apply

Workout per 25 kg  bag : 18 foot coverage

Use of gypsum:

Wall plastering, Manufacture of wall, cement, POP

Benefits of gypsum:

For builders and developers:

1. Cleaner site: Direct application bagged product
2. Requires no water curing
3. Ready to use bags just add some water
4. Faster construction: sand cement plaster required 28 days ready to paint and gypsum required only 3 days for paint

For end customers:

1. Smooth walls
2. Saving on electricity used for air conditioning as gypsum has very law thermal conductivity
3. Gypsum is fire protective:  Gypsum is non-combustible and able to delay a fire’s spread up to 4 hours.
4. Helps in keeping your houses , cool in summer & hot in winters